How to fix PVC row trunking to the wall or ground?
Publish Time: 2024-09-10
There are various ways to fix PVC row trunking, which mainly depends on the material of the wall or ground and the specific application scenario. For common brick walls or concrete walls, pneumatic nail guns or electric hammers can be used to drill holes with expansion plugs, screws and other methods for fixing. This method can quickly and firmly fix PVC row trunking to the wall to ensure that it will not loosen or fall off in future use.
For ordinary walls, such as gypsum board walls or wooden walls, you can choose to fix it by applying glass glue. First, you need to wipe the contact surface between the wall and the wire trough clean to ensure that there is no dust and oil. Then, evenly apply an appropriate amount of glass glue on the back of the wire trough, and be careful to avoid applying too much to avoid overflow. Then, gently press the wire trough on the wall to ensure that it fits tightly with the wall. After the glass glue is completely dry, the PVC row trunking can be firmly fixed to the wall.
In addition to the above methods, you can also use plastic expansion tubes, hangers, brackets and other fixings to fix PVC row trunking. These fixings usually have strong bearing capacity and stability, which can ensure that the cable trunking remains flat and stable during long-term use. When choosing fixings, it is necessary to make reasonable matches according to the material of the wall or floor and the specifications and weight of the cable trunking.
Regardless of the fixing method used, the following points need to be noted: First, ensure that the fixing points are evenly distributed and sufficient in number to ensure the stability of the cable trunking; second, avoid damaging the structure of the wall or floor when drilling or installing fixings; finally, after the installation is completed, carefully check whether each fixing point is firm and reliable to ensure the safe operation of the electrical circuit.
In summary, there are many ways to fix PVC row trunking, and it is necessary to choose the appropriate fixing method and fixings according to the specific situation. Through scientific and reasonable fixing methods, it can ensure that PVC row trunking runs stably and reliably on the wall or floor, providing strong protection for the safety and cleanliness of electrical circuits.
